IC Reverse Simendi
microchip mcu crack
Home : Microchip MCU Attack : PIC12F629 MCU Attack, Microchip MCU code extracion

PIC12F629 MCU Attack, Microchip MCU code extracion

For PIC12F629 MCU Code Extraction, PIC12F629 IC Crack, PIC12F629 MCU Break, and other Microchip IC Attack. we use high-end technologies and the latest laboratory equipment to perfect the technique of microcontroller code recovering (extracting the code from locked microcontrollers). We had analyzed a wide variety of chip types which are commonly used in different industries, which enable us to open the chips and extract the program inside with quick speed and accuracy, and thus help lauching your project quicker and cheaper.

The PIC12F629/675 devices have a 13-bit program counter capable of addressing an 8K x 14 program memory space. Only the first 1K x 14 (0000h – 03FFh) for the PIC12F629/675 devices is physically implemented. Accessing a location above these boundaries will cause a wrap around within the first 1K x 14 space.

High Performance RISC CPU:

• Only 35 instructions to learn

– All single cycle instructions except branches

• Operating speed:

– DC – 20 MHz oscillator/clock input

– DC – 200 ns instruction cycle

• Interrupt capability

• 8-level deep hardware stack

• Direct, Indirect, and Relative Addressing modes

Special Microcontroller Features:

• Internal and external oscillator options

– Precision Internal 4 MHz oscillator factory calibrated to ±1%

– External Oscillator support for crystals and resonators

– 5 μs wake-up from SLEEP, 3.0V, typical

• Power saving SLEEP mode

• Wide operating voltage range – 2.0V to 5.5V

• Industrial and Extended temperature range

• Low power Power-on Reset (POR)

• Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)

• Brown-out Detect (BOD)

• Watchdog Timer (WDT) with independent oscillator for reliable operation

• Multiplexed MCLR/Input-pin

• Interrupt-on-pin change

• Individual programmable weak pull-ups

• Programmable code protection

• High Endurance FLASH/EEPROM Cell

– 100,000 write FLASH endurance

– 1,000,000 write EEPROM endurance

– FLASH/Data EEPROM Retention: > 40 years

Low Power Features:

• Standby Current:

– 1 nA @ 2.0V, typical

• Operating Current:

– 8.5μA @ 32 kHz, 2.0V, typical

– 100μA @ 1 MHz, 2.0V, typical

• Watchdog Timer Current

– 300 nA @ 2.0V, typical

• Timer1 oscillator current:

– 4 μA @ 32 kHz, 2.0V, typical

Peripheral Features:

• 6 I/O pins with individual direction control

• High current sink/source for direct LED drive

• Analog comparator module with:

– One analog comparator

– Programmable on-chip comparator voltage reference (CVREF) module

– Programmable input multiplexing from device inputs

– Comparator output is externally accessible

• Analog-to-Digital Converter module (PIC12F675):

– 10-bit resolution

– Programmable 4-channel input

– Voltage reference input

• Timer0: 8-bit timer/counter with 8-bit programmable prescaler

• Enhanced Timer1:

– 16-bit timer/counter with prescaler

– External Gate Input mode

– Option to use OSC1 and OSC2 in LP mode as Timer1 oscillator, if INTOSC mode


• In-Circuit Serial ProgrammingTM (ICSPTM) via two pins

If you need to read the code from the protected chip PIC12F629. we can help you to crack the MCU and extract the code from PIC12F629 succesfully. Welcome to contact us by Email or Skype. Email: mcureverse@gmail.com

Featured IC Series
Copyright © 2007-2028 Hualan Corporation. All Rights Reserved. IC Reverse is part of Hualan's Technology Group, which also includes: